Impulsing Winding Tester Model 19301A Impulsing Winding Tester Model 19301A

The Chroma 19301A impul se Winding Tester combines high & low inductance test technologies, has a maximum impulse voltage of 1000V, and a high speed sampling rate of 200MHz which satisfies most of the test requirements for power inductor products with a wide inductance range from 0.1uH to 100uH. The built-in functions of Area Size Comparison, Differential Area Comparison, FLUTTER Value, LAPLACIAN Value, ΔPEAK o r Δ P EAK RAT IO, P EAK RAT IO a n d ΔRESONANT AREA functions are able to inspect coils for poor insulation effectively.

S000125 Electrical Safety Test Solution Số lượng: 0 đôi


  •  
  • Impulsing Winding Tester Model 19301A

  • Đăng ngày 27-03-2019 08:15:11 PM - 411 Lượt xem
  • Mã sản phẩm: S000125
  • The Chroma 19301A impul se Winding Tester combines high & low inductance test technologies, has a maximum impulse voltage of 1000V, and a high speed sampling rate of 200MHz which satisfies most of the test requirements for power inductor products with a wide inductance range from 0.1uH to 100uH. The built-in functions of Area Size Comparison, Differential Area Comparison, FLUTTER Value, LAPLACIAN Value, ΔPEAK o r Δ P EAK RAT IO, P EAK RAT IO a n d ΔRESONANT AREA functions are able to inspect coils for poor insulation effectively.


Số lượng
Key Features:
  • Apply high/low inductance test (0.1uH~100uH)
  • 10V~1000V impulse voltage test, with 0.06V test resolution
  • 18mS high speed test (P1.0 for ACQ)
  • Inductance contact check function
  • Inductance differential voltage compensation function
  • High impulse test sampling rate (200MHz),10bits
  • Breakdown Voltage Analysis (BDV)
  • Low voltage range to increase the sensibility of waveform analysis (25V/50V/100V/200V/400V/800V/1000V)
  • Traditional Chinese/Simplified Chinese/English user interface
  • USB port for storing waveform &screen capture
  • Graphical color display
  • Standard LAN, USB and RS232 interface

The Chroma 19301A impul se Winding Tester combines high & low inductance test technologies, has a maximum impulse voltage of 1000V, and a high speed sampling rate of 200MHz which satisfies most of the test requirements for power inductor products with a wide inductance range from 0.1uH to 100uH. The built-in functions of Area Size Comparison, Differential Area Comparison, FLUTTER Value, LAPLACIAN Value, ΔPEAK o r Δ P EAK RAT IO, P EAK RAT IO a n d ΔRESONANT AREA functions are able to inspect coils for poor insulation effectively.

The inspection of wound components for production includes the electrical characteristics test and the withstand voltage test of the electrical safety standard. Poor insulation of a coil, which is a common issue that causes layer short and/or short circuit with the output pin during use, can be caused by bad design, bad molding process, or deterioration of the insulation material. Therefore, it is necessary to perform the layer short test on any winding component or coil.

The 19301A, which is specifically designed for wound component tests, utilizes a high voltage & low capacitance capacitor (low test energy) in parallel with a coil to form an RLC resonant, which is called damping. Analyzing the decay of the waveform via an analysis technology with high speed, precise, and accurate sampling can successfully detect poor insulation within a coil. It provides the winding quality test and the withstand voltage test on the cores for power inductors, and also makes the manufacturer and user checks of the quality of winding component products more efficient.

Th e 19301A can be used to test low inductance winding components with a minimum inductance down to 0.1uH. It provides 4-terminal (4-wire) measurement, contact checks, inductance check and voltage compensation for testing low inductance winding components in order to avoid gross inaccuracies in test voltage caused by the inductance variation of the DUT or the equivalent inductance of wires, which makes it the best impulse winding test instrument for low inductance winding components.

The 19301A has an extremely high test speed that can reduce testing times and increase productivity in automated production. In addition, the voltage compensation function reduces the impac t of the equivalent inductance of the wiring in automated machines.

The brand new Human Machine Interface has a colorful display and screen capture function. The screenshot of the waveform, which is not only suitable for the on-site production but also applicable for R&D and Quality Assurance to analyze and compare, can be saved through the USB port on the front side of the instrument. This improves the convenience of operation.

 Request for quote. Please Select the items and "Add to Inquiry Cart".

Model Description Inquiry
19301A Impulsing Winding Tester
A193001 SMD Choke Test Fixture
A193002 1m Test Wire + Test Clip
A193003 1m Test Wire + Flat Head Cutting
A193004 1m Test Cable BNC to BNC (including BNC Male Connector x 2)

  Ý kiến bạn đọc

     

 

Sản phẩm cùng loại
 
Bạn đã không sử dụng Site, Bấm vào đây để duy trì trạng thái đăng nhập. Thời gian chờ: 60 giây