NGOC MINH ISE CO.,LTD.

• Provide optimized standard test items for the battery pack to deliver excellent test performance
• Easy-to-use software functions specifically designed for production line use
• Flexible software platform with the following functions 
• - Test program editor 
  - Test report format editor 
  - Test report generator 
  - Statistics analysis report editor 
  - User authority setup 
  - Release control 
  - Activity log 
  - Supporting bar code reader
• Expandable system for additional hardware, BMS interface and new test items to fulfill the new requirements of Battery Pack industry.
• Specially designed rack is perfect fit for production line
• Windows 98/2000/NT/XP software platform

Chroma transfers its successful experience in 8000 ATS which is quite well-known in the power electronics industry to the battery application field by developing the Test Items specifically for the battery industry. It can perform automatic tests on the Battery Management System (BMS), semi products and finished products tests on the production line as well as provide long term maintenance and service to the battery module. 8000 (8700) ATS has flexible hardware architecture that can select a variety of hardware devices, such as DC Power Supply, Electronic Load, LCR Meter and 6 1/2 digits Meter, etc. to comply with different automatic testing requirements for various applications. In addition new hardware and test items can be expanded to meet the demands for inspecting the highly customized battery products with diversified tests. The capabilities supported are:

Discharge ability：

• 2.6kW~15.6kW/ 0~80V/ 0~1000V/ 0~1000A 
• Master/Slave parallel operation up to 93.6kW

Charge ability：

• 600W~15kW/ 0~1000V/ 0~375A
• Master/Slave parallel operation up to a max of 5 units

The Chroma 8000 (8700) has standard test items specifically customized and optimized for the features of battery pack and battery module that provide excellent test performance to meet the demands of mass production. Meanwhile, the software equipped is very friendly and easy to operate that is suitable for production line use.

The Chroma 8700 ATS runs under the easy-to-learn Windows 98/2000/NT/XP environment with a specialized power test system for test engineers so that they can utilize the Windows resources effortlessly.

BMS Function Test, Battery (failure) Simulator

Battery cells voltage unbalance test/OVP test/UVP test/OCP test/Output resistance test/BMS data compare/BMS accuracy test/other user-defined items

Application： E-bike／E-motor／ESS／EV module

Key Feature：

• 20~25 series cell voltage simulation
• Support active and passive balance test
• Expandable voltage and current range
• Open and programmable test items to be expanded as desired
• Battery pack dual-output inspection
• Resistance measurement
• BMS IC firmware burn-in
• BMS communication inspection
• BMS supports CANBus, RS485 and RS232 interfaces
• BMS supports power consumption measurement
• BMS IC V/I/T calibration
• Over voltage protection test (see also current charge status)
• Under voltage protection test (see also current discharge status)
• Discharge overcurrent protection test
• Over temperature protection test

Battery pack semi-products and finished products tests for production line (End of Line Test)

Battery pack charge and discharge test/OCP test/DCIR test/ACIR test/Output resistance test/Short test/other user-defined items

Battery Module Maintenance and Certification Test

Application: Any battery or battery pack

Test items:

• DC resistance measurement
  This is the basic action for confirming battery status. The DC resistance (Ohm) affects the battery cell’s capacity and the charge/discharge level of pressure difference. DC Resistance generally tends to be the first hurdle for battery testing or maintenance.

• Capacity test
  This test confirms the capacity of each battery cell. The difference in capacity of each battery cell in the same battery pack should not be very great as a large capacity gap may seriously affect the overall efficiency of battery pack.

• Battery cell balance test
  This adjusts the specific voltage of the battery cells in the battery pack in order to balance the energy levels and overcome the capacity deterioration rate that may cause a mismatched effect within the battery cells. Regular implementation of balancing battery cells helps maximize the battery capacity and life.
  In addition, this function can also be used to create unbalanced voltage conditions for various battery cells in order to perform voltage unbalance related tests (such as UL2271)

 Request for quote. Please Select the items and "Add to Inquiry Cart".