NGOC MINH ISE CO., LTD

This temperature sensor line for sanitary applications provides a wide range of appropriate process connections for the classical temperature measurement. With the clamp-on temperature sensor Siemens breaks new ground. The benefits are particularly at small pipe diameters are the removal of welding and welding validation no disturbance of the process. Comparable accuracy and response time, despite piggability and simple demounting for recalibration.

The temperature sensor line is equipped with direct mount connectors (M12, Lemo usw.). With its construction based on mineral insulated cable (MIC) supports a wide range of applications. Due to compession fittings or soldering nipples the installation is simple and flexible. With the optional surface adapter the measuring of surface temperature are supported.

The certificate for intrinsic safety allows the operation even in Zone 0 without the need of additional thermowell. This application grands an outstanding reaction time.

The temperature sensor line is delivered with direct connected cable. With its construction based on mineral insulated cable (MIC) supports a wide range of applications. Due to compression fittings or soldering nipples the installation is simple and flexible. With the optional surface adapter the measuring of surface temperature are supported.

The certificate for intrinsic safety allows the operation even in Zone 0 without the need of additional thermowell. This application grands an outstanding reaction time.

The SITRANS TO500 multipoint measuring system is used for evaluating a large number of temperature measuring sensors arranged on a very narrow fiber-optic temperature measuring lance. The system consists of the following components: a read-out unit, the transmitter, and the measuring lance, which can each be connected to up to 48 temperature sensors on the transmitter at four channels. With up to four measuring probes, 192 measuring points can therefore be processed at the same time by a SITRANS TO500. The extremely thin sensor measuring probe of < 2 mm is used for measured value transmission. The system is therefore particularly suitable when the user wishes to install a very large number of measuring points in a tight space and with low thermal mass, such as in tube and tube bundle reactors or in capillary or microreactors.

The SITRANS TF280 is a WirelessHART temperature transmitter that provides all measured process values as well as diagnostic information, parameters and functions via radio. The device is powered by an internal battery and designed for ultra low power consumption. Its compact and rugged design makes it specially suitable for direct mounting on tanks and pipes in remote parts of plants, and on moving or rotating equipment for process monitoring or asset management applications.

SITRANS TF is used where other transmitters can't cope. One main point is its rating of IP67.

SITRANS TR320/420 is designed to support all common resistance thermometers and thermocouples. It also evaluates resistance and millivolt signals. Setup is quick and easy with the SIMATIC PDM or the Handheld Communicator. 

SITRANS TW is a consistent further development of the hundred thousand times proven SITRANS T for the 4wire system in the mounting rail housing. Its many new functions set new standards in temperature transmitters. Its diagnostic and simulation functions provide the necessary clarity during commissioning and operation. Its HART®-interface makes the SITRANS TW easily adaptable to any measuring job with SIMATIC PDM.

Physical values can be preset with the simulation function. This enables testing of the complete signal path right as far as the control system without the need for tools. The drag pointer functions measure the system’s process variable minimum and maximum.

All SITRANS TW control room devices are available in non-intrinsically safe versions and intrinsically safe versions for applications under extreme conditions.

SITRANS TR300 is designed to support all common RTDs, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free. Unique user-friendly details are implemented: Without opening the 4-20mA loop, the output current can be read out directly with a multimeter. A red/green LED shows the technician the status at a glance.

SITRANS TR200 is designed to support all common RTDs, thermocouples, resistance and Millivolt sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free. Unique user-friendly details are implemented: Without opening the 4-20mA loop, the output current can be read out directly with a multimeter. A red/green LED shows the technician the status at a glance.

SITRANS TH320/420 is designed to support all common resistance thermometers and thermocouples. It also evaluates resistance and millivolt signals. Setup is quick and easy with the SIMATIC PDM or the Handheld Communicator.

SITRANS TH400 is available either with PROFIBUS PA or FOUNDATION Fieldbus (FF). It is designed to support all common RTD, thermocouple, resistance and millivolt sensors. Setup is quick and easy with SIMATIC PDM(PA) or AMS and handheld communicator(FF). Due to its small size, the device allows flexible mounting options, even in a DIN Type B connection head.

SITRANS TH300 with HART- protocol is designed to support all common thermocouples, resistance and millivolt sensors. Setup is quick and easy with SIMATIC PDM or handheld communicator. Unique user-friendly details are implemented: Without opening the 4..20mA loop the output current can read out directly with a multimeter. A red/green LED shows the technician the status at a glance.

SITRANS TH200 is designed to support all common RTDs, thermocouples, resistance and millivolt-sensors. Setup is quick and easy with the transmitter-modem and SIPROM T software. This configuration tool can be downloaded free. Unique user-friendly details are implemented: Without opening the 4-..20mA loop, the output current can read directly with a multimeter. A red/green LED shows the technician the status at a glance.

SITRANS TH100 is rigid designed for economic use. For example with saving of the galvanic insulation, which is not need for PT100. Therefore the TH100 offers economic plant operation and reliable measurements. It is an ideal substitute for over aged analogue PT100 transmitters. Setup is quick and easy with the transmitter-modem and SIPROM T. This configuration tool can be downloaded for free.

he pressure transmitter SITRANS LH300 is a submersible sensor for hydrostatic level measurement with protective caps made of PPE, stainless steel and ETFE. The transmitter converts the level-proportional hydrostatic pressure into a standardized 4 to 20 mA signal. The transmitter consists of a stainless steel housing (Ø 30 mm) with mechanical protection IP68 and the piezo-resistive sensor with ceramic diaphragm made of 99,6 % purity ceramic ensures versatile use, also good in drinking water systems. The transmitter cable has a diameter of Ø 8 mm and also contains a vent pipe for connection to atmosphere.
The pressure transmitter measures liquid levels in tanks, containers, channels and dams. SITRANS LH300 pressure transmitters are available for various measuring ranges and with explosion protection as an option.

The SITRANS LH100 series pressure transmitter converts the level-proportional hydrostatic pressure into a standardized signal 4 to 20 mA. The transmitter consists of a stainless steel housing (Ø 23,4 mm) with mechanical protection IP 68, a piezo-resistive sensor with ceramic diaphragm. The transmitter cable has a diameter of Ø 6 mm and also contains a vent pipe for connection to the atmosphere.

Der SITRANS P Compact ist ein analoger Messumformer zur Messung von Absolut- und Relativdruck, der für die speziellen Anforderungen der Lebensmittel- / Pharmaindustrie / Biotechnik entwickelt wurde.

The SITRANS transmitters P200, P210 and P220 are compact single-range-transmitters for measurement of absolute and gauge pressure.

In this series we use two different kinds of pressure sensors: two stainless steel sensors and one ceramics sensor. So the measurement of process pressure, absolute pressure and hydrostatic pressure is an easy thing. The measured pressure will be transformed with these sensors into a 4…20-mA- resp. a 0…10-V-signal.

The SITRANS P280 is a WirelessHART pressure transmitter that provides all measured process values as well as diagnostic information, parameters and functions via radio. The device is powered by an internal battery and designed for ultralow power consumption. The compact and rugged design makes it specially suitable for direct mounting on tanks and pipes in remote parts of plants, and on moving or rotating equipment for process monitoring or asset management applications.

The SITRANS P 300 offers the measuring precision and ruggedness already known from the SITRANS P DSIII.

Its stainless steel housing with laser-printed nameplate, together with a wide range of hygienic process connections, mean that it is highly suitable for use in the food & beverages industry as well as for pharmaceutical processes. 
With a maximum deviation in measurement of 0.075% and the proven operating philosophy, it fits seamlessly into the SITRANS P family.

The SITRANS P310 is a digital pressure transmitter with integrated HART diagnostic functions and a high operating comfort. Representing a basic device for easy measurements with low accuracy requirements compared to SITRANS P DS III the P310 complements the already existing P DS III. The different design variants for measuring gauge and differential pressure are of course available. Certifications like e.g. ATEX, NEPSI, FM, CSA and SIL guarantee the application in flameproof areas as well as within processes with high safety requirements.

The SITRANS P DS III series includes digital pressure transmitters for measuring gauge pressure, absolute pressure, differential pressure, flow and level. 
Even the standard devices offer comprehensive  diagnostics and simulation functions with high reliability. The suitability for use in SIL2 circuits has been certified by external test institutes. 
With Profibus transmitters, the new PROFISAFE technology guarantees uniform safety from the control system down to the transmitter.

The SITRANS P410 is a digital pressure transmitter with integrated diagnostic functions for HART, PROFIBUS PA- or FOUNDATION Fieldbus communication. The SITRANS P410 complements the existing P DS III as a “high performance” version with increased measuring accuracy of 0.04%. The different design variants for measuring gauge and differential pressure as well as the existing certifications of the SITRANS P DS III (e.g. ATEX Ex i, Ex d, Ex nA/ic, FM, CSA) are of course available.