NGOC MINH ISE CO., LTD

QV ACCEL Series 363-CNC Vision Measuring System
Post on 26-03-2019 09:58:44 PM

Series QV
FEATURES
Moving-bridge type structure 
Designed with primary focus on measurement efficiency, the machine adopts a more rigid construction and drives the X and Y axes at 400mm/s (QVACCEL808,ACCEL1010). 

The moving-bridge type structure also eliminates the need for a moving stage. This facilitates a more simplified design of the workpiece fixture, resulting in a significant reduction in the man-hours required for fixture fabrication and inspection.

ULTRA QV Series 363-Ultra -high Accuracy CNC Vision Measuring System
Post on 26-03-2019 09:56:41 PM

Series QV
FEATURES

• Minimizes straightness errors through the use of a precision air-bearing linear guide system.
• Utilizes a 0.01µm resolution glass scale manufactured at an ultra-precision facility located eleven meters underground.
• Minimizes accuracy fluctuation against thermal change through the use of virtually zero thermal expansion glass scales.
• Optimizes the mechanical structure of the main unit in Finite Element Method analysis.
• Stabilizes the geometrical accuracy (i.e. straightness of each axis and perpendicularity) to lessen thermal effects. 

Quick Vision WLI Series 363-CNC Video Measuring System with White Light Inferometry
Post on 26-03-2019 09:53:59 PM

*2: In standard mode. Applicable to max. 200μm by modifying scan pitch. 
 

QV STREAM PLUS SERIES 363- CNC Vision Measuring System
Post on 26-03-2019 09:40:54 PM

Series QV
FEATURES
Non-stop Vision Measurement Extreme Improvement in Throughput* 
Conventional vision measuring systems endlessly repeat the cycle of stage displacement, stage stop, measurement, stage start and stage displacement. This mode of operation is a fundamental limitation on improving measurement throughput. In contrast, the Quick Vision Stream system uses an innovative image capture technique that avoids the need to repeatedly stop the stage, thereby allowing for continuous measurement while still maintaining accuracy.

Measurement Throughput Comparison between QV STREAM and the Conventional System
STREAM PLUS series: more than 5 times faster * Comparison of measurement throughput using a Mitutoyo sample workpiece with that of conventional Mitutoyo systems.

Newly Developed Stroboscopic Illumination System
The development of a high-intensity LED flash illuminator makes non-stop vision measurement possible. At the precise moment the stage reaches a measurement point, the illuminator creates an extremely short, high-intensity flash that effectively freezes all motion. The illuminator turns on and off so quickly that no image blur occurs, and the image is captured in full and accurate detail. This innovative design takes full advantage of high-density, high-intensity LED arrays aided by collimating lenses and dichroic mirrors to produce ultra-bright, directional and efficient illumination. 
Extreme Improvement in Throughput
Conventional vision measuring systems endlessly repeat the cycle of stage displacement, stage stop, measurement, stage start and stage displacement again. This mode of operation is a fundamental limitation on improving measurement throughput. In contrast, the Quick Vision STREAM uses an innovative image capture technique that avoids the need to repeatedly stop the stage so measurement can be continuous, but measuring accuracy is retained. By eliminating the time needed to accelerate, decelerate and then hold the stage motionless while a measurement is made a drastic improvement in productivity is achieved.

QV Apex Series 363-CNC Vision Measuring Systems
Post on 26-03-2019 09:33:35 PM

Series 363
FEATURES

Tracking Auto Focus (TAF)

The TAF feature focuses continuously, adjusting to changes in the height of the object being measured.
Automatic tracking of surface waves and war page (in the Z axis height direction) improves measurement
throughput. The feature also cuts out the hassle of focusing during manual measurement, reducing the
work burden for measuring system operators.
Note: Continuous measurement of displacement is not performed. 

Quick Vision Active Compact CNC Vision Measuring Systems
Post on 26-03-2019 09:29:11 PM

Series QV
FEATURES

• High-quality zoom optics with interchangeable lenses
• High-resolution and high-speed color camera
• Compact design saves significant space available in two sizes
• Powerful QVPAK 3D vision software
• Contact and noncontact measurement
• Touch-probe retrofittable
• Programmable LED stage, coaxial and 4-quadrant ring light.

Quick Image SERIES 361 Non-contact 2-D Vision Measuring Systems
Post on 26-03-2019 09:27:39 PM

Series QI
FEATURES
Quick Image is a new concept in 2-D vision measuring instruments. It provides very unique features to improve measurement efficiency. 


• Long focal depth and wide field of view
• Telecentric optical system
• 3 mega-pixel color CCD camera
• Large quadrant LED ring light
• Single-click measurement execution
• Displays measurement results on video
window
• Orientation of part is automatically
detected

Quick Scope SERIES 359-Manual Vision Measuring Systems
Post on 26-03-2019 09:25:25 PM

Series QS-L
FEATURES

• • Surface, contour and fiber-optic ring
  light illumination options enable users to
  configure the QS lighting to meet a variety of
  measurement needs.
  • Powerful, Windows®-based QSPAK software
  offers a spectrum of measuring and analysis
  capabilities.
  • Functions include auto-focus, measurement
  playback, one-click edge detection, graphic
  display, 48 different macros and a pattern
  matching function for several common part
  features.
  • Excellent surface observation model for a
  variety of workpieces.
  • 0.1μm resolution and 150mm Z-axis range.
  • Power zoom enables quick magnification
  changes.
  • Fine illumination capability enables lighting
  changes to match workpiece requirements.
  • The quick release system on the stage enables
  instant switching between coarse and fine
  movements.
  • Quick Navigation function enables the user to
  repeat measurements quickly.