RONDCOM 73A RONDCOM 73A

World standard instrument of highest-in-class accuracy applicable to downsized parts.

S000148 CYLINDRICAL PROFILE Quantity: 0 đôi


  •  
  • RONDCOM 73A

  • Post on 29-03-2019 04:32:45 PM - 1263 Views
  • World standard instrument of highest-in-class accuracy applicable to downsized parts.


Features

Assures rotation accuracy of 0.06 μm at rotation speed of 4/min


Assures rotation accuracy of 0.06 μm at rotation speed of 4/min

With a rotation speed of 4/min (twice as fast as existing instruments) and rotation accuracy guaranteed at 0.06μm (a long shaft measuring tool: 0.6μm) which is the highest in its class, the RONDCOM 73A dramatically increases measuring throughput.

High Straightness/Parallel Accuracy (Actual Values)


High Straightness/Parallel Accuracy (Actual Values)

RONDCOM 73A guarantees Z-axis straightness accuracy of 0.9μm/200mm or less which is the highest in its class.
Z-axis parallelism is 0.9μm/100mm or less which is also the highest in its class.

Smaller Footprint

RONDCOM 73A achieved a 27% reduction of width and a 24% reduction of footprint X-axis stroke of 600 mm has been ensured while signifi cantly downsizing the instrument body. In addition, Y-axis stroke has been extended to 120 mm. Z-axis stroke of 1015 mm has been ensured although the instrument body is only 2500 mm high.


Smaller Footprint
Smaller Footprint

Safety Device and Auto Balancing Mechanism on R-axis

Provided as standard, the detector holder safety device identifies a collision between a workpiece and a detector.
An auto balancing mechanism is also provided on the R-axis, so there is no need to adjust a counterweight to acco mmodate different measuring diameters.

R-axis Feed Range: 265 mm

At 265 mm, the R-axis feed range is the widest in its class (equivalent to our existing instruments). This eliminates the need to change detector positions to acco mmodate different measuring diameters.

Adaptive to Higher Accuracy Requirements (Optional)

Pneumatic Vibration Isolation Stand Available (Optional)

Adaptive to 400 kg Loading (Optional)

All Orientation Detector May be Provided (Optional)

Manual Feed Mechanism Available for Each Axis (Optional)

     

 

Products in this Category
NGOC MINH ISE CO.,LTD
- HCMC Office: Block A, Lever 2, Linh Trung Building, No 6-8, Road no 16, Linh Trung Ward, Thu Duc City, HCMC.
- Head Quaters: 427 Le Dai Hanh, Ward 11, District 11, HCM City.
- Hanoi Office: 156A Quan Thanh Str., Ba Dinh Dist., Hanoi City.
- Phone: +84-28-66865303  
- Mobile: +84 982 427 168
- Email: dung@ngocminh-ise.com
- Website: http://ngocminh-ise.com
You did not use the site, Click here to remain logged. Timeout: 60 second