Specifications
Item Code | 211762 |
---|---|
Model | DH832 |
System | Forced air circulation and ventilation |
Operating temp. range | Room temp. +15°C~300°C |
Temperature fluctuation | ±1.5°C (at 300°C) |
Temperature slope | 18°C (at 300°C) |
Temperature controller | PID Z control |
PID Z control Temp setting method | Digital setting with ▲/▼ keys |
Timer | 1 min~99 hrs 59 min (Resolution: 1 minute or 1 hour) |
Operation function | Fixed temperature operation, Program operation (Maximum 99 steps, up to 99 patterns, repeat operation function) |
Operation function | Duration/time select timer operation function (Fixed temperature operation, auto start/auto stop/quick auto stop, program operation auto start) |
Additional functions | Accumulated Power on and Operation Time (up to 65,535 hours); Calendar Time (24 hours); Calibration Offset; Monitor Display of Accumulated Power Consumption, |
Additional functions | Total CO2 Emission, and Heater operating Output; Power Recovery Mode; User Settings Save and Restore Function; Fan Speed Setting Function |
Sensor | K-thermocouple (double sensor) |
Heater | Stainless steel pipe heater with a fan |
Heater | 6.9kW |
Fan motor | Stainless steel axial flow fan (capacitor motor: 20W), Two motors used for Model 1032 |
Cable port | I.D. ø30mm (rear) |
Heat insulator | Glass wool + ceramic fiber |
Other additional structure | Exhaust damper (manual operation) |
Safety device | Self-diagnostic functions (temp. sensor error, heater disconnection, SSR short-circuit, automatic overheat prevention), Door switch, Fan Failure Detection, key lock, independent overheat protection, electric leakage breaker with over current protection |
Shelf / support | 3 pcs. / 6 pcs. |
Internal dimensions(W×D×H mm) | 800×800×800mm |
External dimensions(W×D×H mm) | 1500×1015×1330mm |
Remarks(dimensions) | 512L |
Power Source | AC220V 20A Three-phase |
Weight | 350kg |
Maintenance and warranty
1. Conditions: temperature and humidity: 23 deg.C+/-5 deg.C, 65%RH+/-20% (no load)
2. External dimensions do not include protrusions.